Parking Lot Line Paint Stripers Nitrogen Cylinder Trueline Stripers
(up to 120 PSI)

Trueline Air Pressure Tank Striper

Parking Lot Stripers are popular because there are no moving parts, no noise and no vibration.

One #80 Nitrogen cylinder, hold 2,200 psi, enough pressure to spray 100 gallons of paint before refilling. Refills at your local welding supply store is approx. $15.

Nitrogen is a completely neutral gas. It will not dry paint or change the pH sensitive balance. It also makes up two thirds of the air we breathe and is non-flammable and very safe.

Sprays any type of Traffic Paint.

Trueline Striper Model 250N
Trueline Striper Model 250N

With 5 Gallon Stainless Steel Paint Tank.

Comes complete with 4" Spray Box and all specifications below.

Where to buy Nitrogen Cylinders

You can purchase or rent a #80 (80 cubic feet) Nitrogen cylinder from your local welding supply dealer. Expect to pay approximately $100 initially for a steel exchangeable cylinder, then $15 to $20 for refills.

$1,870.00

(Nitrogen cylinder not included)

UPS Shipping $94.00
Handling Time: 1-3 days
Shipping Time: 2-5 days

Buy Now

Trueline Striper Model 350N
Trueline Striper Model 350N

With 10 Gallon Stainless Steel Paint Tank.

Comes complete with 4" Spray Box and all specifications below.

Where to buy Nitrogen Cylinders

You can purchase or rent a #80 (80 cubic feet) Nitrogen cylinder from your local welding supply dealer. Expect to pay approximately $100 initially for a steel exchangeable cylinder, then $15 to $20 for refills.

$2,370.00

(Nitrogen cylinder not included)

UPS Shipping $94.00
Handling Time: 1-3 days
Shipping Time: 2-5 days

Buy Now

30 day Satisfaction Guarantee

When you purchase a Trueline Striper or any attachment, we guarantee that you will be completely satisfied within 30 days or you may return it for a full refund!

10 Year Warranty

Against rust-through on tanks and chassis

2 Year Warranty

Against defective parts and workmanship

Everything in Stock

Ready for immediate shipment!

Specifications:
  • Welded Angle Iron Steel Frame with 5/8" solid steel axles.
  • 10" pneumatic tires, heavy duty steel hub, steel ball bearing, load rating 100 lbs. each.
  • Commercial quality Shut-off valve, spring loaded for instant control.
  • Power Mixing Paddle for mixing the paint.
  • Regulator with dual guages. One shows the amount of Pressure in the Nitrogen Cylinder and the other for operating pressure.
  • Drain valve/hose makes clean-up a quick, clean job.
  • Box Lift Lever assembly raises and lowers spray box.
  • Heavy gauge steel Spray Box, fixed width for precision lines.
  • All steel parts have a baked on powder coating.
  • Alumininum hand control, stainless steel cable.
  • Guide line pointer, helps you stripe a perfect straight line.
  • 9", 8 quart galvanized steel funnel with fine mesh nylon strainer bags.
  • Tank Brush to clean inside of paint tank.
  • Parking Brake locks wheels tight in rolling terrain.
  • Viscometer to measure paint thickness.
  • Extra Spray Tips for heavier coverage and faster production.
  • Tip cleaning brush.
  • Brass and Stainless Steel Fittings
  • Comes 98% assembled. Within 30 minutes you are ready to stripe!